Computer does not shut down or boot up properly!

Go down

Computer does not shut down or boot up properly! Empty Computer does not shut down or boot up properly!

Post  Gee7o7 on Mon Oct 03, 2011 8:17 pm

I am using a custom built machine I made myself I am running Ubuntu Linux 11.04 64-bit version every time I boot up my machine there is a rectangular box up top on my screen when it says "UBUNTU" and when I am booting down I either get the same as the boot up problem I described or I get a black screen and in 5 seconds a bunch of codes and words pop up and the screen automatically zooms in and freezes.

Gee7o7

Posts : 6
Join date : 2011-10-03

View user profile

Back to top Go down

Computer does not shut down or boot up properly! Empty Re: Computer does not shut down or boot up properly!

Post  kaddy on Tue Oct 04, 2011 7:08 am

hi Gee7o7

what is the entire specs of your setup including wifi/network adapter?
kaddy
kaddy
Admin

Posts : 248
Join date : 2011-01-26

View user profile http://linux4unme.forumotion.com

Back to top Go down

Computer does not shut down or boot up properly! Empty specs

Post  Gee7o7 on Tue Oct 04, 2011 7:16 pm

ASRock E350M1 motherboard
w/ integrated AMD Radeon HD 6310 graphics
and 1.66 ghz processor
2 gigabytes of RAM
320 gigabytes Western Digitial Blue HDD
for more info type in ASRock E350M1 on google sorry can't post link for 7 days that's what it told me while trying to post it!

Gee7o7

Posts : 6
Join date : 2011-10-03

View user profile

Back to top Go down

Computer does not shut down or boot up properly! Empty Re: Computer does not shut down or boot up properly!

Post  kaddy on Wed Oct 05, 2011 6:57 am

do you use Wifi? and if so what chipset is it? It "could" be a problem with the wrong driver causing this issue while shutting down which i have seen happen before like here
http://ubuntuforums.org/showthread.php?t=1694262


kaddy
kaddy
Admin

Posts : 248
Join date : 2011-01-26

View user profile http://linux4unme.forumotion.com

Back to top Go down

Computer does not shut down or boot up properly! Empty Re: Computer does not shut down or boot up properly!

Post  Gee7o7 on Wed Oct 05, 2011 6:55 pm

no wifi i use an ethernet cord.

Gee7o7

Posts : 6
Join date : 2011-10-03

View user profile

Back to top Go down

Computer does not shut down or boot up properly! Empty Re: Computer does not shut down or boot up properly!

Post  kaddy on Fri Oct 07, 2011 7:47 am

ok

what graphics card driver are you running? the opensource driver for radeon or the proprietary one?
can you tell me exactly what driver it is......
kaddy
kaddy
Admin

Posts : 248
Join date : 2011-01-26

View user profile http://linux4unme.forumotion.com

Back to top Go down

Computer does not shut down or boot up properly! Empty Re: Computer does not shut down or boot up properly!

Post  Gee7o7 on Sat Oct 08, 2011 11:40 am

I am sort of new to ubuntu 11.04 and just linux in general so If you can tell me how to get that information? That would be highly appreciated.

Gee7o7

Posts : 6
Join date : 2011-10-03

View user profile

Back to top Go down

Computer does not shut down or boot up properly! Empty Re: Computer does not shut down or boot up properly!

Post  kaddy on Sun Oct 09, 2011 7:33 am

sure

but first of all.... did you install a graphics driver at all? or did you just install ubuntu and not install any driver? do you remember opening the "hardware drivers" gui and enabling a graphics card driver? if not... then i would look for that hardware driver package in your menu and install the ati driver that it recommends......

kaddy
kaddy
Admin

Posts : 248
Join date : 2011-01-26

View user profile http://linux4unme.forumotion.com

Back to top Go down

Computer does not shut down or boot up properly! Empty Re: Computer does not shut down or boot up properly!

Post  Gee7o7 on Sun Oct 09, 2011 2:32 pm

Yes i did install the drivers because with out them i would not be able to obtain my screen resolution of 1280x 1024 (5:4)

Gee7o7

Posts : 6
Join date : 2011-10-03

View user profile

Back to top Go down

Computer does not shut down or boot up properly! Empty Re: Computer does not shut down or boot up properly!

Post  kaddy on Mon Oct 10, 2011 8:21 am

ok

open up a terminal, type in "dmesg" and post output here pls
kaddy
kaddy
Admin

Posts : 248
Join date : 2011-01-26

View user profile http://linux4unme.forumotion.com

Back to top Go down

Computer does not shut down or boot up properly! Empty I think this what you asked for?

Post  Gee7o7 on Thu Oct 13, 2011 4:44 pm

0.832934] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.832961] vgaarb: loaded
[ 0.833271] SCSI subsystem initialized
[ 0.833313] libata version 3.00 loaded.
[ 0.833313] usbcore: registered new interface driver usbfs
[ 0.833313] usbcore: registered new interface driver hub
[ 0.833313] usbcore: registered new device driver usb
[ 0.833313] wmi: Mapper loaded
[ 0.833313] PCI: Using ACPI for IRQ routing
[ 0.833313] PCI: pci_cache_line_size set to 64 bytes
[ 0.833313] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
[ 0.833313] reserve RAM buffer: 0000000067c96000 - 0000000067ffffff
[ 0.833313] reserve RAM buffer: 0000000067d11000 - 0000000067ffffff
[ 0.833313] reserve RAM buffer: 0000000067f00000 - 0000000067ffffff
[ 0.833313] NetLabel: Initializing
[ 0.833313] NetLabel: domain hash size = 128
[ 0.833313] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.833313] NetLabel: unlabeled traffic allowed by default
[ 0.833313] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.833313] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.833313] Switching to clocksource hpet
[ 0.833376] Switched to NOHz mode on CPU #0
[ 0.833457] Switched to NOHz mode on CPU #1
[ 0.842612] AppArmor: AppArmor Filesystem Enabled
[ 0.842673] pnp: PnP ACPI init
[ 0.842712] ACPI: bus type pnp registered
[ 0.843043] pnp 00:00: [bus 00-ff]
[ 0.843048] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.843052] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.843056] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.843061] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.843065] pnp 00:00: [mem 0x000c8000-0x000dffff window]
[ 0.843069] pnp 00:00: [mem 0x80000000-0xffffffff window]
[ 0.843073] pnp 00:00: [mem 0x00000000 window]
[ 0.843162] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.843231] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.843333] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.843340] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.843772] pnp 00:02: [io 0x040b]
[ 0.843776] pnp 00:02: [io 0x04d6]
[ 0.843779] pnp 00:02: [io 0x0c00-0x0c01]
[ 0.843782] pnp 00:02: [io 0x0c14]
[ 0.843789] pnp 00:02: [io 0x0c50-0x0c51]
[ 0.843792] pnp 00:02: [io 0x0c52]
[ 0.843795] pnp 00:02: [io 0x0c6c]
[ 0.843798] pnp 00:02: [io 0x0c6f]
[ 0.843802] pnp 00:02: [io 0x0cd0-0x0cd1]
[ 0.843805] pnp 00:02: [io 0x0cd2-0x0cd3]
[ 0.843808] pnp 00:02: [io 0x0cd4-0x0cd5]
[ 0.843811] pnp 00:02: [io 0x0cd6-0x0cd7]
[ 0.843814] pnp 00:02: [io 0x0cd8-0x0cdf]
[ 0.843817] pnp 00:02: [io 0x0800-0x089f]
[ 0.843821] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 0.843824] pnp 00:02: [io 0x0000-0x000f]
[ 0.843828] pnp 00:02: [io 0x0b20-0x0b3f]
[ 0.843831] pnp 00:02: [io 0x0900-0x090f]
[ 0.843834] pnp 00:02: [io 0x0910-0x091f]
[ 0.843837] pnp 00:02: [io 0xfe00-0xfefe]
[ 0.843840] pnp 00:02: [io 0x0060-0x005f disabled]
[ 0.843844] pnp 00:02: [io 0x0064-0x0063 disabled]
[ 0.843847] pnp 00:02: [mem 0xfec00000-0xfec00fff]
[ 0.843851] pnp 00:02: [mem 0xfee00000-0xfee00fff]
[ 0.843854] pnp 00:02: [mem 0xfed80000-0xfed8ffff]
[ 0.843857] pnp 00:02: [mem 0xfed61000-0xfed70fff]
[ 0.843861] pnp 00:02: [mem 0xfec10000-0xfec10fff]
[ 0.843864] pnp 00:02: [mem 0xfed00000-0xfed00fff]
[ 0.843867] pnp 00:02: [mem 0xffc00000-0xffffffff]
[ 0.843991] system 00:02: [io 0x040b] has been reserved
[ 0.843995] system 00:02: [io 0x04d6] has been reserved
[ 0.843999] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 0.844004] system 00:02: [io 0x0c14] has been reserved
[ 0.844008] system 00:02: [io 0x0c50-0x0c51] has been reserved
[ 0.844012] system 00:02: [io 0x0c52] has been reserved
[ 0.844015] system 00:02: [io 0x0c6c] has been reserved
[ 0.844019] system 00:02: [io 0x0c6f] has been reserved
[ 0.844024] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
[ 0.844028] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
[ 0.844032] system 00:02: [io 0x0cd4-0x0cd5] has been reserved
[ 0.844036] system 00:02: [io 0x0cd6-0x0cd7] has been reserved
[ 0.844040] system 00:02: [io 0x0cd8-0x0cdf] has been reserved
[ 0.844044] system 00:02: [io 0x0800-0x089f] has been reserved
[ 0.844048] system 00:02: [io 0x0b20-0x0b3f] has been reserved
[ 0.844052] system 00:02: [io 0x0900-0x090f] has been reserved
[ 0.844057] system 00:02: [io 0x0910-0x091f] has been reserved
[ 0.844061] system 00:02: [io 0xfe00-0xfefe] has been reserved
[ 0.844068] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.844073] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.844078] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.844083] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.844088] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.844093] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.844098] system 00:02: [mem 0xffc00000-0xffffffff] has been reserved
[ 0.844105] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.844225] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
[ 0.844229] pnp 00:03: [io 0x0290-0x029f]
[ 0.844233] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
[ 0.844314] system 00:03: [io 0x0290-0x029f] has been reserved
[ 0.844320] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.844519] pnp 00:04: [dma 4]
[ 0.844523] pnp 00:04: [io 0x0000-0x000f]
[ 0.844526] pnp 00:04: [io 0x0081-0x0083]
[ 0.844530] pnp 00:04: [io 0x0087]
[ 0.844533] pnp 00:04: [io 0x0089-0x008b]
[ 0.844536] pnp 00:04: [io 0x008f]
[ 0.844539] pnp 00:04: [io 0x00c0-0x00df]
[ 0.844585] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.844605] pnp 00:05: [io 0x0070-0x0071]
[ 0.844680] pnp 00:05: [irq 8]
[ 0.844729] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.844745] pnp 00:06: [io 0x0061]
[ 0.844788] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.844836] pnp 00:07: [io 0x0010-0x001f]
[ 0.844839] pnp 00:07: [io 0x0022-0x003f]
[ 0.844843] pnp 00:07: [io 0x0044-0x005f]
[ 0.844846] pnp 00:07: [io 0x0072-0x007f]
[ 0.844853] pnp 00:07: [io 0x0080]
[ 0.844856] pnp 00:07: [io 0x0084-0x0086]
[ 0.844859] pnp 00:07: [io 0x0088]
[ 0.844862] pnp 00:07: [io 0x008c-0x008e]
[ 0.844865] pnp 00:07: [io 0x0090-0x009f]
[ 0.844869] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.844872] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.844875] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.844964] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.844970] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.844988] pnp 00:08: [io 0x00f0-0x00ff]
[ 0.844997] pnp 00:08: [irq 13]
[ 0.845050] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.845151] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.845671] pnp 00:0a: [io 0x03f8-0x03ff]
[ 0.845680] pnp 00:0a: [irq 4]
[ 0.845684] pnp 00:0a: [dma 0 disabled]
[ 0.845774] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.846741] pnp 00:0b: [mem 0x68000000-0x7fffffff]
[ 0.846845] system 00:0b: [mem 0x68000000-0x7fffffff] has been reserved
[ 0.846852] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.847171] pnp 00:0c: [mem 0xfed00000-0xfed003ff]
[ 0.847234] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.847243] pnp: PnP ACPI: found 13 devices
[ 0.847246] ACPI: ACPI bus type pnp unregistered
[ 0.855333] pci 0000:00:04.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
[ 0.855344] pci 0000:00:04.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[ 0.855352] pci 0000:00:04.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.855357] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[ 0.855363] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
[ 0.855370] pci 0000:00:04.0: bridge window [mem 0x80000000-0x801fffff]
[ 0.855376] pci 0000:00:04.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
[ 0.855385] pci 0000:00:14.4: PCI bridge to [bus 02-02]
[ 0.855388] pci 0000:00:14.4: bridge window [io disabled]
[ 0.855426] pci 0000:00:14.4: bridge window [mem disabled]
[ 0.855432] pci 0000:00:14.4: bridge window [mem pref disabled]
[ 0.855441] pci 0000:00:15.0: PCI bridge to [bus 03-03]
[ 0.855444] pci 0000:00:15.0: bridge window [io disabled]
[ 0.855451] pci 0000:00:15.0: bridge window [mem disabled]
[ 0.855456] pci 0000:00:15.0: bridge window [mem pref disabled]
[ 0.855465] pci 0000:00:15.1: PCI bridge to [bus 04-04]
[ 0.855469] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
[ 0.855476] pci 0000:00:15.1: bridge window [mem disabled]
[ 0.855482] pci 0000:00:15.1: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.855524] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.855532] pci 0000:00:04.0: setting latency timer to 64
[ 0.855548] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.855554] pci 0000:00:15.0: setting latency timer to 64
[ 0.855564] pci 0000:00:15.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.855570] pci 0000:00:15.1: setting latency timer to 64
[ 0.855577] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.855581] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.855585] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.855589] pci_bus 0000:00: resource 7 [mem 0x000c8000-0x000dffff]
[ 0.855593] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff]
[ 0.855597] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.855601] pci_bus 0000:01: resource 1 [mem 0x80000000-0x801fffff]
[ 0.855605] pci_bus 0000:01: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[ 0.855610] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
[ 0.855614] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
[ 0.855618] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.855622] pci_bus 0000:02: resource 7 [mem 0x000c8000-0x000dffff]
[ 0.855626] pci_bus 0000:02: resource 8 [mem 0x80000000-0xffffffff]
[ 0.855630] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.855634] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.855700] NET: Registered protocol family 2
[ 0.855904] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.857150] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.859712] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.860375] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.860381] TCP reno registered
[ 0.860408] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.860453] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.860629] NET: Registered protocol family 1
[ 0.860659] pci 0000:00:01.0: Boot video device
[ 1.710158] PCI: CLS 64 bytes, default 64
[ 1.710842] audit: initializing netlink socket (disabled)
[ 1.710860] type=2000 audit(1318544735.710:1): initialized
[ 1.731717] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.735261] VFS: Disk quotas dquot_6.5.2
[ 1.735385] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.736784] fuse init (API version 7.16)
[ 1.736971] msgmni has been set to 3248
[ 1.737541] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.737662] io scheduler noop registered
[ 1.737667] io scheduler deadline registered
[ 1.737775] io scheduler cfq registered (default)
[ 1.738238] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.738280] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.738516] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.770081] ACPI: Power Button [PWRB]
[ 1.770227] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.770236] ACPI: Power Button [PWRF]
[ 1.770593] ACPI: acpi_idle registered with cpuidle
[ 1.781047] ERST: Table is not found!
[ 1.781198] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.801929] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.827783] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.840586] Linux agpgart interface v0.103
[ 1.842690] brd: module loaded
[ 1.843631] loop: module loaded
[ 1.843822] i2c-core: driver [adp5520] using legacy suspend method
[ 1.843826] i2c-core: driver [adp5520] using legacy resume method
[ 1.844145] pata_acpi 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.844782] Fixed MDIO Bus: probed
[ 1.844832] PPP generic driver version 2.4.2
[ 1.844912] tun: Universal TUN/TAP device driver, 1.6
[ 1.844915] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.845071] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.845153] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.845188] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.845256] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.845411] ehci_hcd 0000:00:12.2: QUIRK: Enable exception for AMD Hudson ASPM
[ 1.845417] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.845462] ehci_hcd 0000:00:12.2: debug port 1
[ 1.845506] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb4d000
[ 1.860094] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.860389] hub 1-0:1.0: USB hub found
[ 1.860398] hub 1-0:1.0: 5 ports detected
[ 1.860651] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.860680] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.860761] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.860890] ehci_hcd 0000:00:13.2: QUIRK: Enable exception for AMD Hudson ASPM
[ 1.860901] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.860957] ehci_hcd 0000:00:13.2: debug port 1
[ 1.860980] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb4b000
[ 1.880095] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.880342] hub 2-0:1.0: USB hub found
[ 1.880351] hub 2-0:1.0: 5 ports detected
[ 1.880602] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.880628] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 1.880697] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 1.880815] ehci_hcd 0000:00:16.2: QUIRK: Enable exception for AMD Hudson ASPM
[ 1.880825] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.880885] ehci_hcd 0000:00:16.2: debug port 1
[ 1.880906] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfeb48000
[ 1.900093] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.900303] hub 3-0:1.0: USB hub found
[ 1.900311] hub 3-0:1.0: 4 ports detected
[ 1.900499] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.900598] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.900624] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.900691] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 1.900864] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb4e000
[ 1.964294] hub 4-0:1.0: USB hub found
[ 1.964358] hub 4-0:1.0: 5 ports detected
[ 1.964534] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.964557] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.964630] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.964761] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb4c000
[ 2.024300] hub 5-0:1.0: USB hub found
[ 2.024365] hub 5-0:1.0: 5 ports detected
[ 2.024607] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.024634] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 2.024702] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 2.024853] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb4a000
[ 2.084306] hub 6-0:1.0: USB hub found
[ 2.084371] hub 6-0:1.0: 2 ports detected
[ 2.084598] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.084624] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 2.084702] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 2.084846] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfeb49000
[ 2.144330] hub 7-0:1.0: USB hub found
[ 2.144395] hub 7-0:1.0: 4 ports detected
[ 2.144581] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.144775] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.148128] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.148139] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.148358] mousedev: PS/2 mouse device common for all mice
[ 2.148695] rtc_cmos 00:05: RTC can wake from S4
[ 2.148866] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 2.148955] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.149150] device-mapper: uevent: version 1.0.3
[ 2.149311] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 2.149535] device-mapper: multipath: version 1.2.0 loaded
[ 2.149540] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.149952] cpuidle: using governor ladder
[ 2.150141] cpuidle: using governor menu
[ 2.150532] TCP cubic registered
[ 2.150789] NET: Registered protocol family 10
[ 2.151585] NET: Registered protocol family 17
[ 2.151622] Registering the dns_resolver key type
[ 2.151718] powernow-k8: Found 1 AMD E-350 Processor (2 cpu cores) (version 2.20.00)
[ 2.151787] powernow-k8: 0 : pstate 0 (1600 MHz)
[ 2.151790] powernow-k8: 1 : pstate 1 (1280 MHz)
[ 2.151793] powernow-k8: 2 : pstate 2 (800 MHz)
[ 2.152221] PM: Hibernation image not present or could not be loaded.
[ 2.152247] registered taskstats version 1
[ 2.152762] Magic number: 15:709:451
[ 2.152948] rtc_cmos 00:05: setting system clock to 2011-10-13 22:25:36 UTC (1318544736)
[ 2.152953] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.152955] EDD information not available.
[ 2.156226] Freeing unused kernel memory: 956k freed
[ 2.156751] Write protecting the kernel read-only data: 10240k
[ 2.158324] Freeing unused kernel memory: 184k freed
[ 2.167653] Freeing unused kernel memory: 1440k freed
[ 2.208072] <30>udev[63]: starting version 167
[ 2.320369] scsi0 : pata_atiixp
[ 2.329427] scsi1 : pata_atiixp
[ 2.330909] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf100 irq 14
[ 2.330914] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf108 irq 15
[ 2.335440] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.335536] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.335597] r8169 0000:04:00.0: setting latency timer to 64
[ 2.335606] r8169 0000:04:00.0: (unregistered net_device): unknown MAC, using family default
[ 2.335682] r8169 0000:04:00.0: irq 40 for MSI/MSI-X
[ 2.336500] r8169 0000:04:00.0: eth0: RTL8168b/8111b at 0xffffc9000031a000, 00:25:22:b3:77:ca, XID 0c200000 IRQ 40
[ 2.371551] ahci 0000:00:11.0: version 3.0
[ 2.371652] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.371913] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 2.371919] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
[ 2.413623] scsi2 : ahci
[ 2.413897] scsi3 : ahci
[ 2.414090] scsi4 : ahci
[ 2.414221] scsi5 : ahci
[ 2.414460] ata3: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f100 irq 19
[ 2.414467] ata4: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f180 irq 19
[ 2.414472] ata5: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f200 irq 19
[ 2.414477] ata6: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f280 irq 19
[ 2.530115] usb 5-2: new full speed USB device using ohci_hcd and address 2
[ 2.710109] Refined TSC clocksource calibration: 1599.999 MHz.
[ 2.710126] Switching to clocksource tsc
[ 2.760170] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.760225] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.840272] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/input/input2
[ 2.840442] generic-usb 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:13.0-2/input0
[ 2.845047] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.1/input/input3
[ 2.845357] generic-usb 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.0-2/input1
[ 2.845388] usbcore: registered new interface driver usbhid
[ 2.845391] usbhid: USB HID core driver
[ 2.960115] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.960169] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.960763] ata5.00: ATAPI: TSSTcorp CDDVDW SH-222AB, SB00, max UDMA/100
[ 2.961065] ata3.00: ATA-8: WDC WD3200AAKS-61L9A0, 01.03E01, max UDMA/133
[ 2.961075] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.961599] ata5.00: configured for UDMA/100
[ 2.962867] ata3.00: configured for UDMA/133
[ 2.963312] scsi 2:0:0:0: Direct-Access ATA WDC WD3200AAKS-6 01.0 PQ: 0 ANSI: 5
[ 2.963571] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.963629] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 2.963683] sd 2:0:0:0: [sda] Write Protect is off
[ 2.963688] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.963743] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.964587] scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW SH-222AB SB00 PQ: 0 ANSI: 5
[ 2.967443] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.967452] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.967695] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 2.967814] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 3.008526] sda: sda1 sda2 < sda5 >
[ 3.009280] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.371508] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 12.541421] <30>udev[286]: starting version 167
[ 12.587686] lp: driver loaded but no devices found
[ 12.591747] Adding 1700860k swap on /dev/sda5. Priority:-1 extents:1 across:1700860k
[ 12.609499] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 12.609509] Disabling lock debugging due to kernel taint
[ 12.809173] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 12.837681] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 12.956354] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 12.956546] SP5100 TCO timer: mmio address 0xbafe00 already in use
[ 13.124006] type=1400 audit(1318544747.458:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=521 comm="apparmor_parser"
[ 13.124618] type=1400 audit(1318544747.458:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=521 comm="apparmor_parser"
[ 13.124991] type=1400 audit(1318544747.458:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=521 comm="apparmor_parser"
[ 13.188533] HDA Intel 0000:00:01.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 13.188630] HDA Intel 0000:00:01.1: irq 41 for MSI/MSI-X
[ 13.188665] HDA Intel 0000:00:01.1: setting latency timer to 64
[ 13.221299] hda-intel: Enable sync_write for AMD chipset
[ 13.237199] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.357844] hda-intel: Enable sync_write for AMD chipset
[ 13.622933] hda_codec: ALC892: BIOS auto-probing.
[ 13.646572] type=1400 audit(1318544747.978:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=688 comm="apparmor_parser"
[ 13.665104] type=1400 audit(1318544747.998:6): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=687 comm="apparmor_parser"
[ 13.667763] type=1400 audit(1318544747.998:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=688 comm="apparmor_parser"
[ 13.668148] type=1400 audit(1318544747.998:Cool: apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=688 comm="apparmor_parser"
[ 13.699676] type=1400 audit(1318544748.028:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=695 comm="apparmor_parser"
[ 13.711101] type=1400 audit(1318544748.048:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=695 comm="apparmor_parser"
[ 13.715608] type=1400 audit(1318544748.048:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=691 comm="apparmor_parser"
[ 13.771505] r8169 0000:04:00.0: eth0: link down
[ 13.771523] r8169 0000:04:00.0: eth0: link down
[ 13.772006] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.834514] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input4
[ 13.859538] [fglrx] Maximum main memory to use for locked dma buffers: 1516 MBytes.
[ 13.859623] [fglrx] vendor: 1002 device: 9802 count: 1
[ 13.860598] [fglrx] ioport: bar 1, base 0xf000, size: 0x100
[ 13.860620] pci 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 13.860629] pci 0000:00:01.0: setting latency timer to 64
[ 13.861450] [fglrx] Kernel PAT support is enabled
[ 13.861492] [fglrx] module loaded - fglrx 8.84.60 [Mar 24 2011] with 1 minors
[ 14.279256] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010980000, using 1216k, total 1216k
[ 14.279264] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 14.279268] vesafb: scrolling: redraw
[ 14.279273] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 14.285013] Console: switching to colour frame buffer device 80x30
[ 14.285049] fb0: VESA VGA frame buffer device
[ 14.332311] ppdev: user-space parallel port driver
[ 15.436042] r8169 0000:04:00.0: eth0: link up
[ 15.436476] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 15.778486] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 16.109059] fglrx_pci 0000:00:01.0: irq 42 for MSI/MSI-X
[ 16.109982] [fglrx] Firegl kernel thread PID: 1078
[ 16.110347] [fglrx] Firegl kernel thread PID: 1079
[ 16.110592] [fglrx] Firegl kernel thread PID: 1080
[ 16.110839] [fglrx] IRQ 42 Enabled
[ 16.209665] [fglrx] Gart USWC size:508 M.
[ 16.209673] [fglrx] Gart cacheable size:199 M.
[ 16.209683] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 16.209687] [fglrx] Reserved FB block: Unshared offset:fe67000, size:199000
[ 16.209692] [fglrx] Reserved FB block: Unshared offset:17ff4000, size:c000
[ 19.400390] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 19.672402] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 25.890076] eth0: no IPv6 routers present
[ 107.261072] show_signal_msg: 15 callbacks suppressed
[ 107.261081] polkit-gnome-au[1371]: segfault at 28 ip 00007fbbd6ca89d8 sp 00007fffb0b32980 error 4 in libglib-2.0.so.0.2800.6[7fbbd6c81000+ed000]
[ 107.894098] [fglrx] IRQ 42 Disabled
[ 109.833028] fglrx_pci 0000:00:01.0: irq 42 for MSI/MSI-X
[ 109.834030] [fglrx] Firegl kernel thread PID: 1567
[ 109.834372] [fglrx] Firegl kernel thread PID: 1568
[ 109.834547] [fglrx] Firegl kernel thread PID: 1569
[ 109.834916] [fglrx] IRQ 42 Enabled
[ 109.921445] [fglrx] Gart USWC size:508 M.
[ 109.921453] [fglrx] Gart cacheable size:199 M.
[ 109.921463] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 109.921468] [fglrx] Reserved FB block: Unshared offset:fe67000, size:199000
[ 109.921472] [fglrx] Reserved FB block: Unshared offset:17ff4000, size:c000

Gee7o7

Posts : 6
Join date : 2011-10-03

View user profile

Back to top Go down

Computer does not shut down or boot up properly! Empty Re: Computer does not shut down or boot up properly!

Post  kaddy on Tue Oct 18, 2011 7:35 am

only just checked my emails... sorry for the slow reply......... have you posted this on the #buntu forums aswell? you may get quicker answers since I am not here as
much as I wish I could be......... and the forums are a bit slow at the moment until it grows somewhat.......

but i will have a good look at the dmesg info 2moro as it is late right now..... ta

kaddy
kaddy
kaddy
Admin

Posts : 248
Join date : 2011-01-26

View user profile http://linux4unme.forumotion.com

Back to top Go down

Computer does not shut down or boot up properly! Empty Re: Computer does not shut down or boot up properly!

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum